The Structural Buckling of Carbon Nanotube-Reinforced Nanocomposite

Authors

https://doi.org/10.48314/ijrceai.vi.65

Abstract

The recent developments of lightweight and highly-strong structural materials have resulted in the increased attention paid to the nanocomposites reinforced with carbon nanotubes (CNTs), owing to their unique mechanical properties. This paper explores the stability analysis of the nanocomposite beams reinforced with CNTs via a computational model based on the finite element method. The properties of the nanocomposite material are determined with the help of the Mori-Tanaka micromechanical approach where various types of CNT dispersion, such as aligned and random distribution, are taken into account. Moreover, the effects of weak Van der Waals interaction in the CNT-matrix interface are taken into consideration.

The influence of some important design parameters like the volume fraction of CNT, diameter of nanotubes, thermal condition, interfacial interphase thickness, and geometry of the beam cross-section is examined regarding the influence of these parameters on the critical buckling capacity. The results reveal that increasing the volume fraction of CNT significantly enhances the stiffness of the material, making it highly resistant to elastic instability. Additionally, the presence of the interfacial interphase layer plays a significant role in improving the performance of the structure.

It is concluded from the numerical analysis that the temperature rise has a negative impact on the buckling behavior since the effective stiffness of the nanocomposites decreases. In addition, it has been found out that the utilization of CNTs with small diameters and larger interphase thickness leads to higher critical buckling loads especially by considering the interface phenomena. Moreover, it is noted that the beam geometry has a great influence on stability behavior. Thus, the longer beams have lower buckling loads, while the increased cross-sections lead to the improvement of the load-carrying capacity. In addition, it can be stated that the beams with hollow cross-sections have better performance than beams with solid cross-sections. From the mesh analysis, it is shown that there is no significant change in the results after reaching an appropriate number of elements. Therefore, computational cost efficiency can be achieved without losing accuracy.

Keywords:

Buckling Behavior, CNT-Reinforced Nanocomposite Beams, Finite Element Modeling, Mori–Tanaka Homogenization Method

References

  1. [1] Ramani, A., et al., Nanotechnology: An emerging trend in the dairy industry – Applications and future challenges. Food and Humanity, 2024. 3: p. 100409.
  2. [2] Sahoo, M., et al., Nanotechnology: Current applications and future scope in food. Food Frontiers, 2021. 2(1): p. 3-22.
  3. [3] Aguilar-Pérez, K.M., et al., Insight of nanotechnological processing for nano-fortified functional foods and nutraceutical—opportunities, challenges, and future scope in food for better health. Critical Reviews in Food Science and Nutrition, 2023. 63(20): p. 4618-4635.
  4. [4] Kiran, V., et al., Nanotechnology's Role in Ensuring Food Safety and Security. Biocatalysis and Agricultural Biotechnology, 2024: p. 103220.
  5. [5] Huang, X., et al., Chiral sulfur nanosheets for dual-selective inhibition of gram-positive bacteria. ACS nano, 2023. 17(15): p. 14893-14903.
  6. [6] Zhang, Z., et al., Copper incorporated biomaterial-based technologies for multifunctional wound repair. Theranostics, 2024. 14(2): p. 547-570.
  7. [7] Zhao, J., et al., Multifunctional nanozyme-reinforced copper-coordination polymer nanoparticles for drug-resistance bacteria extinction and diabetic wound healing. Biomaterials Research, 2023. 27(1): p. 88.
  8. [8] Mekuye, B., R. Höfer, and B. Abera, Nanomaterials: Terms, Definition and Classification, in Reference Module in Materials Science and Materials Engineering. 2024, Elsevier.
  9. [9] Abdalkreem, T.M., Optical Properties of Gold and Silver Nanoparticles. 2018, Sudan University of Science and Technology.
  10. [10] Afolalu, S., et al. Morphological characterization and physio-chemical properties of nanoparticle-review. in IOP Conference Series: Materials Science and Engineering. 2019. IOP Publishing.
  11. [11] Sun, J., et al., Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications. Advances in Colloid and Interface Science, 2024. 328: p. 103177.
  12. [12] Deng, Y., et al., The electronic transport characteristics subsequent to linear doping with nitrogen or boron in (8,0) single-walled carbon nanotubes. Materials Science in Semiconductor Processing, 2025. 185: p. 109000.
  13. [13] Li, X., et al., Self-supporting activated carbon/carbon nanotube/reduced graphene oxide flexible electrode for high performance supercapacitor. Carbon, 2018. 129: p. 236-244.
  14. [14] Miao, R., et al., Theoretical and experimental investigations of enhanced carbon nanotube-gold interface conductivity through nitrogen doping. Nanoscale, 2024. 16(1): p. 249-261.
  15. [15] Takakura, A., et al., Strength of carbon nanotubes depends on their chemical structures. Nature communications, 2019. 10(1): p. 3040.
  16. [16] Zheng, H., et al., Recent advances of interphases in carbon fiber-reinforced polymer composites: A review. Composites Part B: Engineering, 2022. 233: p. 109639.
  17. [17] Medupin, R., et al., Thermal and physico-mechanical stability of recycled high density polyethylene reinforced with oil palm fibres. Engineering Science and Technology, an International Journal, 2017. 20(6): p. 1623-1631.
  18. [18] Mohammed, L., et al., A review on natural fiber reinforced polymer composite and its applications. International journal of polymer science, 2015. 2015(1): p. 243947.
  19. [19] Kuan, H.T.N., et al., Mechanical properties of particulate organic natural filler-reinforced polymer composite: A review. Composites and Advanced Materials, 2021. 30: p. 26349833211007502.
  20. [20] Thyavihalli Girijappa, Y.G., et al., Natural fibers as sustainable and renewable resource for development of eco-friendly composites: a comprehensive review. Frontiers in materials, 2019. 6: p. 226.

Published

2026-08-11

Issue

Articles in Press

Section

Articles

How to Cite

Masoomi, H. (2026). The Structural Buckling of Carbon Nanotube-Reinforced Nanocomposite. International Journal of Researches on Civil Engineering With Artificial Intelligence . https://doi.org/10.48314/ijrceai.vi.65

Similar Articles

1-10 of 32

You may also start an advanced similarity search for this article.